OSHA 30: Construction Industry Outreach Training Course (IACET CEU=3.0) (Actively Proctored)

This program provides information about worker rights and employer responsibilities and describes how to identify, abate, avoid and prevent job-related hazards. Although many essential safety topics are covered, additional site-specific information and hands-on demonstrations of skills are ultimately needed for your safety and to fulfill training requirements found in OSHA standards. Many jurisdictions, employers and unions require this course, which is voluntary at the U.S. federal level. Each student who completes the program will receive a completion card issued by the U.S. Department of Labor. OSHA Outreach Training is only available to trainees within the geographic jurisdiction of the Occupational Safety and Health (OSH) Act. Trainees outside this jurisdiction will not receive cards. This 30-Hour program is intended for workers with some safety responsibility, and the 10-Hour program is primarily intended for entry-level workers. The program will take longer than 30 hours.

Language

English

Estimated Time

1826 min

CEU Credits

3.00

Contains

OSHA Outreach Training Orientation

OSHA Outreach Training Learner Responsibilities

Introduction to OSHA (US)

OSHA Inspections for Construction and Multi-Employer Worksites (US)

Applying Electrical Standards (US)

Using Electrical Safety Programs (US)

Personal Protective Equipment (PPE): Electrical Protection

Electrical Safety for Construction: Cord and Plug Connected Equipment (US)

Electrical Safety for Construction: Power Lines and Lockout/Tagout (LOTO) (US)

Lockout/Tagout (LOTO) Programs and Procedures

Fall Protection (US)

Fall Protection: Rescues

Job Hazard Analysis (JHA)

Pre-Job Briefings

Lone Worker: Concerns

Lone Worker: Risk Assessment

Why Incident Management Matters Introduction

Culture of Early Reporting

What If? Mentality

Inspections and Observations

Giving and Receiving Feedback

Reporting (Data Entry)

Incident Investigation

Tasks and Corrective Actions

Continuously Improve for Safety Excellence

Integrated Systems - Achieving Organizational Excellence

Safety and You for Supervisors

Personal Factors in Safety

Egress and Emergency Action Plans (US)

Safety Signs (US)

Personal Protective Equipment (PPE): Hazard Assessment

Hearing Conservation (US)

Respiratory Protection (US)

Hexavalent Chromium

Lead Poisoning

Dust Mask - Voluntary Use Guidelines (US)

Bench Grinder Safety

Machine Guarding Part 1: Hazards

Machine Guarding Part 2: Precautions

Hydraulic Safety

Compressed Air Safety Awareness

Hand, Wrist and Finger Safety

Preventing Cuts and Puncture Wounds

Hand Tool Safety for Construction

Power Tool Safety for Construction

Lithium-Ion Battery Awareness

Struck-By, Caught-Between - Staying Out of the Line of Fire for Construction

Personal Protective Equipment (PPE): Body Protection

Work Zone Safety, Part 1: Preparation (US)

Work Zone Safety, Part 2: Operations (US)

Demolition Hazards (US)

Personal Protective Equipment (PPE): Head Protection

Blasting Area Awareness

OSHA Outreach Training Midway Progress Report

Excavation and Trenching Safety (US)

Blocking and Cribbing

Load Securement for Heavy Equipment (US)

Concrete and Masonry Awareness

Stacking and Storage Practices for Construction (US)

Materials Handling Practices for Construction (US)

Rough Terrain Forklift Safety - Part 1: Readiness

Rough Terrain Forklift Safety - Part 2: Operation

Industrial Ergonomics

Preventing Back Injury

Housekeeping on the Job

Personal Protective Equipment (PPE): Foot and Leg Protection

Walking/Working Surfaces

Slips, Trips and Falls for Construction

Mobile Elevated Work Platforms

Scaffold Safety Essentials

Ladder Safety for Construction: Selection and Inspection

Ladder Safety for Construction: Setup and Use

Crane Operator Safety

Crane Signaling Awareness

Basic Rigging Principles, Part 1: Hazards and Risks

Basic Rigging Principles, Part 2: General Safety

Basic Rigging Principles, Part 3: Rigging Equipment

Hazard Communication for Construction: Written Program (US)

Hazard Communication for Construction: How to Use Labels and Safety Data Sheets (US)

Industrial Hygiene Awareness

Asbestos Hazards: Workers in the United States (US)

Asbestos Hazards: Characteristics and Health Effects

Asbestos Hazards: Products and Types

Asbestos Hazards: Signs, Areas and Monitoring

Asbestos Hazards: Avoiding Exposure

Asbestos Hazards: Release Response

Crystalline Silica Awareness

Corrosive Safety

Personal Protective Equipment (PPE): Eye and Face Protection

Using Eyewashes and Emergency Showers

Handwashing Awareness

Bloodborne Pathogens (BBP)

Vector-Borne Disease Awareness: Mosquitoes, Ticks and Other Pests

Heat Stress

Cold Stress

Confined Spaces: Construction Requirements

Hydrogen Sulfide (H2S) Awareness

Safety Everywhere: Carbon Monoxide

HAZWOPER: Direct Reading Gas Detector Safety

Flammable and Combustible Liquids

Fire Extinguisher Safety for Construction: Part 1 - Fight or Flee (US)

Fire Extinguisher Safety for Construction: Part 2 - Using Extinguishers (US)

Compressed Gas Cylinder Safety

Welding, Cutting and Brazing Part 1 of 3: Methods

Welding, Cutting and Brazing Part 2 of 3: Physical Hazards

Welding, Cutting and Brazing Part 3 of 3: Health Hazards

Hot Work for Construction

Low-Speed and Utility Vehicle Safety

Defensive Driving - Small Vehicles

OSHA Outreach Training Wrap-Up

Price

$159.00 per seat

Tags

OSHA 10 & 30